Klever X SPEED, Руководство пользователя

Страница: 27 / 56

27 www.klever-mobility.com
Handlebar adjustment
The handlebar can be adjusted to your body measurements
and your personal preferences, by changing the angle of the
handlebar (image 21). Your Klever dealer will be happy to set
the handlebar to your liking. However, in case you intend to
adjust the handlebar by yourself, then proceed as follows:
Loosen the 4 bolts of the front cap of the stem a couple of
turns with the proper Allen key and adjust the angle of the
handlebar (image 22). Tighten the 4 bolts of the front cap
with the correct torque. Please note that the adjustment of
the angle of the handlebar may have also altered the position
of the brake levers, the display and the shifter.
If necessary you can adjust the position of these components
too. Loosen the Allen key bolts and screws of the display,
brake levers and shifters. Turn them into the correct position
and keep in mind that your hands should be resting on the
handlebar in a relaxed way and should not be forced into
an unnatural position. Finally tighten the Allen key bolts
with the correct torque. You may have to repeat these steps
a couple of times in order to find the most suitable and
convenient position according to your liking and needs.
Caution! Check whether the handlebar is correctly
tightened, you should not be able to turn it at all.
7.3 Headset
In order to steer easily and safely, the fork´s bearing in the
frame (headset) must function smoothly and be without any
play (image 23). During riding, dynamic loads put a lot of stress
on the headset. Therefore, a regular check is indispensable.
Pull the front wheel brake with one hand and push the bike
gently forward and backward. If you notice a movement
between headset and frame, the headset has to be readjusted.
Attention: The adjustment of the headset requires some
experience. This operation is best left to an authorised
and experienced dealer.
If you should make the adjustment by yourself, make the
following steps:
1. Loosen the bolts on the side of the stem, clamping the stem
to the fork, with an Allen key, (image 24).
2. Carefully remove the top cap of the stem and turn the bolt
on top of the fork steerer a quarter of a turn tighter (image 25).
The Speed Pedelec
Image 21
Image 22
Image 23
Image 24