Klever X SPEED, Руководство пользователя

Страница: 36 / 56

36 www.klever-mobility.com
8. Transport of your Speed
Pedelec
You can transport your Speed Pedelec easily by car or train.
For transport by car we recommend to use a tow bar bike
rack, which is specifically designed for the transport of
E-bikes and for heavier loads. Please ask your dealer for more
specific recommendations.
Not recommended is the transport on the car roof. The
heavier weight and the special frame tubes prevent you from
stably fixing the Speed Pedelec on a roof rack. In addition,
the weight of the Speed Pedelec is usually higher than the
maximum weight limit of the car roof rack.
Prior to transporting your vehicle with a tow bar rack,
you should remove the battery pack, the display as well as
other non-fixed accessories such as: air pump and panniers.
Additional protection should be given to electrical contacts
of the bracket of the display and to the battery connector
on the frame. This can be done with a plastic bag to protect
those parts from moisture and rain. Air flow may cause the
moisture to enter into the electric system.
If your car is big enough, then it is best to transport your
X Speed on the inside of your car. That offers the optimal
protection.
The transportation by air is almost impossible, unless you
want to transport the bike without the battery. For airlines,
these batteries are classified as hazardous goods and
consequently will not be transported. To be sure, ask your
airline under which conditions the transport of the battery
may be allowed. However, this could be quite expensive.
For more information on the transport of the battery, please
check section 6.4.4. page 23 Transport of the battery.
Transport