Klever X SPEED, Руководство пользователя

Страница: 33 / 56

33 www.klever-mobility.com
• For the suspension front fork (image 34): first open the
lever of the quick release and then turn the thru axle
counter clockwise. Remove it from the front wheel.
• Pull the front wheel out of the fork.
• Block the brake pads of the disc-brake by inserting the
enclosed pad separator into the calliper (image 32).
• The assembly of the front wheel is done in reverse order.
• During assembly please insert the disc carefully between
the two brake pads.
• Pay attention to the correct torque of the thru axle (20 Nm).
Note: Rotors can be very hot after riding. Let them cool
down, before disassembly.
Caution: Check before each ride whether the tyres are
still correctly fitted to the wheels.
Tyres
The tyre provides grip and traction and contributes
significantly to the smooth running and comfort by
absorbing little bumps.
The tyre size can be found on the sidewall printed specifically
in millimetres and inches: 27.5” x 2.40” or 62 – 584 mm. The
rim has a diameter of 584 mm. (27.5”) and a width of 62 mm.
(2.40”).
The recommended tyre pressure is indicated on the
sidewall of the tyres (Schwalbe Super Moto 2.0 – 4.0 bar;
30 – 55 Psi).
Regularly check the correct tyre pressure and pressurise your
tyres if necessary.
The
tyre uses an inner tube with Schrader valve.
So, you can check and inflate the tyre at any gas station.
Caution: above-or below never exceed this recommended
range. The tyre and the tube can be damaged and this may
lead to sudden loss of air with significant risk of accident.
Regularly check the tyres for cracks and for its tread pattern
height. If you find that cracks or sharp objects have damaged
the fabric of the tyre or the tread pattern is no longer
sufficient, replace the tyres. If in doubt, ask your dealer. He will
verify the tyres and if necessary replace them.
The Speed Pedelec
Image 33
Image 34