background image

BATTERY CHARGING INSTRUCTIONS

WALL MOUNTING

Models DCB107, DCB112, DCB113, DCB115

These chargers are designed to be wall mountable or to sit upright on a table or work 

surface. If wall mounting, locate the charger within reach of an electrical outlet. Mount 

the charger securely using drywall screws at least 1" (25.4 mm) long, screwed into 

wood to an optimal depth leaving approximately 7/32" (5.5 mm) of the screw exposed.

IMPORTANT CHARGING NOTES

1. Longest life and best performance can be obtained if the battery pack is charged  

  when the air temperature is between 65 ˚F and 75 ˚F (18 ˚ – 24 ˚C). 

DO NOT

 charge  

  the battery pack in an air temperature below 40 ˚F (4.5 ˚C), or above 104 ˚F (40 ˚C).  

  This is important and will prevent serious damage to the battery pack.
2. The charger and battery pack may become warm to the touch while charging. This  

  is a normal condition, and does not indicate a problem. To facilitate the cooling of the 

  battery pack after use, avoid placing the charger or battery pack in a warm    

  environment such as in a metal shed or an uninsulated trailer.
3. A cold battery pack will charge at about half the rate of a warm battery pack. The  

  battery pack will charge at that slower rate throughout the entire charging cycle and  

  will not return to maximum charge rate even if the battery pack warms.
4. If the battery pack does not charge properly:
  a.  Check operation of receptacle by plugging in a lamp or other appliance;
  b.  Check to see if receptacle is connected to a light switch which turns power off 

when you turn out the lights; 

  c.  Move the charger and battery pack to a location where the surrounding air 

temperature is approximately 65 ˚F – 75 ˚F (18 ˚ – 24 ˚C); 

  d.  If charging problems persist, take the tool, battery pack and charger to your local 

service center.

5. The battery pack should be recharged when it fails to produce sufficient power  

  on jobs which were easily done previously. DO NOT CONTINUE to use under these  

  conditions. Follow the charging procedure. You may also charge a partially used pack  

  whenever you desire with no adverse effect on the battery pack.

www.

.com

[email protected]

1.800.561.8187

Содержание DEWALT BAT20-LW























Отзывы: