16
Automatic
operation
(programmed start and stop times)
To cook food in the oven using the automatic timer, proceed as follows:
-
establish how long the food needs to cook
-
enter the cooking stop time
-
select the temperature and the cooking method.
Once these steps have been completed, the
“AUTO”
indicator will light up permanently in
the display, confirming that the oven has been programmed.
Practical example: we want to cook food for a period of 30 minutes, ending at 14.00.
-
Pressing and holding
,
enter
0.30
in the display.
-
Pressing and holding
,
enter
14.00 in the display.
This done, the display will revert to the current time and
“AUTO”
reappears, confirming
that the settings have been acknowledged and memori
s
ed. At 13.30 (14.00 minus 30 minutes)
the oven switches on automatically and the symbols
and
“AUTO”
will appear for as long
as cooking continues. The oven will then switch off automatically at 14.00, triggering a
beep that can be silenced by pressing
.
Semiautomatic
operation
A. Programming the duration
B. Programming the stop time.
A) Select the duration for which the food is to cook by pressing
.
The oven will switch
on immediately, with the symbols
“AUTO”
and
showing in the display. Once the set
duration has elapsed, cooking will stop and the beep sounds intermittently. Silence the
beep as indicated above
.
B) Set the time for cooking to stop, by pressing
.
The oven will switch on immediately,
with the symbols
“AUTO”
and
.
showing in the display. When the set time comes
around, cooking will stop and the beep sounds intermittently. Silence the beep as indicated
above
.
Current programming status can be displayed at any given moment by pressing the
corresponding button.
It is also possible to cancel the current selection at any moment by pressing
and resetting
the display to zero. Pressing
at this point, the programmer will revert to manual mode.
CAUTION:
If
the
oven is disconnected from the power supply, or in the event of a power
failure, the clock resets to zero and all programming will be lost. When power is restored,
three zeroes appear.
