13
Electrical connection
Make certain the nominal a.c. power supply voltage corresponds to that indicated on the
identification data plate. The appliance must be connected to the supply by way of an isolating
switch with minimum contact separation of 3 mm. Suitable isolating components include
automatic breakers, fuses and relays.
The oven must be connected to an efficient earth system, as prescribed by national and/or
local statutory regulations.
The appliance is supplied with a power cable. In the event of the cable being replaced for
any reason, the replacement must be as prescribed by statutory regulations and respond to
the specifications indicated on the Technical Data page.
The terminal box is located at the rear of the appliance. If a new cable is fitted, route it
through the clamp and make the connections as shown in the diagram. The earth wire must
be cut longer than the other wires so that it will be the last to break off in the event of the
cable being tugged.
Having made the connection, tighten the cable clamp and close the cover of the box.
