SL6KLN1AU_ara_en_a_638_X.doc – 15.02.08
Seite 6 von 49
(E)
Hygienic rinsing symbol
Depending on the programme and special function, the
hygienic rinsing symbol is displayed from the final rinse. If the
door is opened during this time, the symbol goes out and is no
longer displayed in this programme.
(F)
Remaining running time in minutes
(G)
Programme progress indicator
3.3
Pushbuttons / Additional functions (Sa–Sc)
3.3.1 Main
switch
2-pole On/Off switch with fleeting contact.
3.3.2 Soaking
(optional)
The ”soaking” button can also be selected for any rinse programme.
If the button is pressed, an additional prerinse occurs and the bottom
basket is heated to 55°. This causes the running time to be extended
by approx. 20 min. Recommended for mixed utensils (top basket:
fragile utensils / bottom basket: very dirty non-fragile utensils).
3.3.3
Top basket (optional)
The top basket button must be pressed if only the top basket is to be
rinsed. The water points are positioned for top basket rinsing through-
out the rinse cycle. However, the programme sequence is the same
as for alternate rinsing.
3.3.4
Time reduction (optional)
The time reduction button can also be selected for any programme.
When the button is pressed, the circulation and drying times and
therefore the rinsing and drying performance are reduced
3.3.5 VarioSpeed
(optional)
The programme running time is reduced with the “VarioSpeed” option.
This is made possible by adjusting the software, water points with two-
basket function, changing the water flow. This results in a higher
energy and water consumption.
3.3.6
Bottom basket (optional)
The bottom basket button must be pressed if only the bottom basket is
to be rinsed. The water points are positioned for bottom basket rinsing
throughout the rinse cycle. However, the programme sequence is the
same as for alternate rinsing.
3.3.7 Timer
programming
(TP)
The timer programming button enables the start time to be delayed by
up to 19 h
3.3.8
Half load (optional)
The “Half Load” function reduces water consumption and the running
time. Basically this is achieved by passing over the prerinse and the
second intermediate rinse cycle.
