SL6KLN1AU_ara_en_a_638_X.doc – 15.02.08
Seite 8 von 49
3.5 Special
functions
3.5.1
Setting the hardness range
Hold down the S3 button and switch on the appliance. The set value is
indicated on the digital display. The set value increases by one each
time the S3 button is pressed. When the
“H7”
value is reached, the
display jumps back to
“H0”
. While the setting is running, the L3 LED
flashes. When the appliance is switched off, the value is saved. (Table
below)
°dH
°fH
°Clarke mmol / l Salt consumption
in g per rinse cycle
Set value
(display)
0–3
0–6
0–4
0–0.6
0
H0
4–6
7–11
5–8
0.7–1.1
2
H1
7-9
12–16
9–11
1.2–1.6
4
H2
10–12 17–21 12–15 1.7–2.1
6
H3
13–16 22–29 16–20 2.2–2.9
9
H4
17–21 30–37 21–26 3.0–3.7
14
H5
22–30 38–54 27–38 3.8–5.4
27
H6
31–50 55–89 39–62 5.5–8.9
54
H7
Standard setting = H4
3.5.2
Setting intensive drying
Hold down the S2 button and switch on the appliance.
“0”
is indicated
on the digital display. If the S2 button is pressed again,
“1”
is dis-
played and intensive drying is switched on. While the setting is
running, the L2 LED flashes. When the appliance is switched off, the
value is saved. If intensive drying is activated, the temperature is
increased in the final rinse.
3.5.3
Setting the buzzer
Hold down the S4 button and switch on the appliance. The set value is
indicated on the display. The set value increases by one each time the
S4 button is pressed. The volume setting can be changed between 0
= buzzer off, and 3 = buzzer loud. While the setting is running, the S4
LED flashes. When the appliance is switched off, the value is saved.
3.5.4
Setting the rinse aid dosage / refill indicator
3.5.4.1 Top
dispenser
Hold down the Sc button and switch on the appliance. The set value is
indicated on the display. The set value increases by one each time the
Sc button is pressed. When the
“6”
value is reached, the display
jumps back to
“0”
. While the setting is running, the Lc LED flashes.
When the appliance is switched off, the value is saved.
If the setting is positioned on
“0”
, the refill indicator is de-activated. If
he low rinse-aid indicator is de-activated, the temperature is in-
creased in the final rinse to improve the drying result. (see also
3 in 1
detergent detection
)
3.5.4.2 Normal
dispenser
Hold down the Sc button and switch on the appliance.
“1”
is indicated
on the digital display. If the Sc button is pressed again,
“0”
is dis-
played and the low rinse-aid indicator is switched off. While the setting
is running, the Lc LED flashes. When the appliance is switched off,
the value is saved.
If the low rinse-aid indicator is de-activated, the temperature is in-
creased in the final rinse to improve the drying result. (see also
3 in 1
detergent detection
)
