11
After choosing the desired cooking function, press button
. The most
appropriate elements activate to quickly reach the temperature set and on the
display the symbol
will be visible and will disappear as soon as the temperature
is reached. The program will also sound a buzzer to alert you. At this point the
system will activate the functions previously set.
The quick heating cannot be activated: with the
GRILL
function, when the
difference between the set temperature and the target temperature is less than
50°C and when the target temperature is less than 100°C.
Display of the temperature
The 5 bars near the set temperature indicator show the temperature level reached
by lighting up as the temperature increases. The nearby flashing upward arrow
signals the oven is warming. After cooking is automatically or manually interrupted,
with the temperature inside the oven above 60°C, the flashing downward arrow
and the writing
hot
will appear on the display until the oven temperature drops
below 60°C.
Acoustic Signal
The acoustic signal continues at the end of a program for about 7 minutes. To
interrupt it press
+
or
–
. The intensity of the signal can be regulated on three
different sound levels in the following way: in
STOP
position, act on symbol
–
keeping it pressed for about 5 seconds until the currently set tone level appears
(
tn1 high – tn2 medium – tn3 low). Again act on symbol
–
to set the wanted level.
The previous screen returns after a few seconds.
Tones of the controls
It is possible to amend the type of sound emitted when acting on the controls.
In
STOP
position, keep symbol
+
pressed for about 5 seconds. Again act on
symbol
+
to choose
“bt”
(beep tone),
“c”
(click tone) or
“nt”
(no tone).
Clock reading mode
The basic programming envisions reading of the time in 24 hours. To display
the time in 12 hours am/pm, keep
+
and
–
pressed simultaneously for about 5
seconds. The new setting will appear on the display.
Energy saving option
To limit electric energy waste to a minimum, you may use the
PS
(Power Save)
function. Once activated, this function switches the oven off completely and,
without cooking functions activated, no intervention can be made with any control.
Keep the symbol
pressed for about 5 seconds, the writing
PS on
will appear.
The function is now activated and the oven will automatically switch-off after about
1 minute. To switch it on, act on symbol
. To go back to previous situation,
repeat the operation (basic programming is set on PS OFF)..
Safety for children or against accidental contacts
This function allows you to block access to the functionality of the keys both when
the oven is running and as a prevention with the oven is off.
When acting on the
symbol for about 2 seconds, this function is activated, (the
symbol is displayed). This prevents children or other persons from touching
the programmer symbols accidentally, thus modifying the previous program or
starting the oven. Act as follows to deactivate it. Every programmer signal that
occurs during oven operation when the safety lock is activated can be eliminated
by acting on any of the boxed symbols. The safety lock will remain active.
NOTES: The lock must be deactivated to change programme settings.
Errors codes
When situations preventing the normal functioning of the oven occur, the device
warns with a series of errors signals, which:
Err1: communication error – Err2: PT1000 (probe) open circuit – Err3: PT1000
(probe) closed circuit – Err4: temperature on display too high – Err5: Temperature
on the power board too high – Err6: fault on the display – Err7: fault in the power
board – Err8: no heating is detected.
For errors
Err4 and Err5, switch-off the oven and leave it to cool down for a few
hours, then try working it again. If the error persists, call the after-sales technical
assistance.
If any other errors occur, advise an authorised after-sales technical
representative.
