Kleenmaid OFS9021, Инструкция по использованию и гарантийные обязательства

Страница: 6 / 32

Pag
e 5
Installation Instructions
The appliance must be installed by authorised personnel in accordance to the manufactur
e
r' s
instructions and local regulations.
NOTE: Before making preparations for or commencing installation, the installer should refer to
the current online version of the User Manual, which is available on the Kleenmaid website (see
back cover for details).
This appliance must be installed in accordance with:
AS/NZS 5601 - Gas Installations (for Australia)
NZS 5261 – Code of Practice for the Installation of Gas Burning Appliances and Equipment (for
New Zealand)
Local gas fitting regulations
AS/NZS 3000 – Electrical Installations (Wiring Rules)
Building codes
Installation environment
The gas appliance shall be installed such that the surface temperature of any nearby combustible
surface will not exceed 65°C above ambient. If there is insufficient space or natural air flow to meet this
requirement, creating an air gap between a heat shield and/or insulating material and the combustible
substrate may be effective. Care should be taken where a combustible surface is
covered by a non-combustible material. For example, covering a combustible surface with stainless
steel may not prevent heat transfer and in some circumstances a hazardous situation could arise.
The materials used in the adjacent cabinets is to be able to withstand a temperature of 90°C or
higher
. Combustible materials, such as curtains, must be at the minimum distance of 500mm. Refer
to the diagram below, any vertical combustible surface, A, which is less than 200mm measured
from the periphery of the nearest burner, must have either
i.
B of not less than 150mm above the periphery of the nearest burner for full dimension (width or
depth) of the cooking surface area, OR
ii.
C of 10mm or more.
Th
e d
istanc
e b
etwee
n t
h
e h
ighes
t p
ar
t of t
h
e h
ighes
t b
urne
r of t
h
e c
ooke
r a
n
d a
i.
Exhaust fan is 750mm
ii.
Rangehood
- The safety gap between the cooker and the rangehood above must comply
with the recommendations of the rangehood manufacturer. In case of no instructions, a
minimum distance of 600mm (or other minimum distance as may be specified by AS/
NZS 5601 and interpreted by a certified installer) should apply.
Diagra
m b
elo
w s
how
s t
h
e r
equirement
s a
n
d p
roduc
t d
imension
.