26
LEVELLING
The cooker is equipped with 4 levelling feet which must be fitted to the base of the cooker in
the following manner:
Place the cooker on its back as shown in the figure 18.
Screw the 4 levelling feet to the cooker.
Stand the cooker and levelling it by screwing or unscrewing the feet with a spanner.
ANTI-TILT BRACKET
Fixing the anti-tilt bracket:
After you have located where the cooker is to be positioned mark, on the wall, the place
where the 2 screws of the anti-tilt bracket have to be fitted. Please follow the indications
given in the drawing below (fig. 19).
Make two holes of diameter 8mm on the wall and insert the plastic plugs.
Attach the anti-tilt bracket loosely by means of 2 screws.
Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can
engage in one slot of the cooker back.
Tighten the anti-tilt bracket screws to attach it firmly to the wall.
Push the cooker against the wall so that the anti-tilt bracket is fully inserted in one slot of
the cooker back.
Fig. 18
Fig. 19
