Kleenmaid DW6020, Инструкция по эксплуатации

Страница: 13 / 40

Water inlet hose
Do not use the water inlet hose of your old
machine, if any. nstead u se the new
water inlet hose supplied with your
machine. If you are going to connect a new
or long - unused water inlet hose to your
machine, run water through it for a while
before making the connection. Connect the
water inlet hose directly to the water inlet
tap. The pressure supplied by the tap
should be at a minimum of 0.03 Mpa and
and at a maximum of 1 Mpa.If the water
pressure is above 1 Mpa,a pressure - relief
valve should be fitted to the tap .
After the connections are made, the tap should be turned
on fully and checked for water tightness. For the protection
of your machine, always make sure to turn off the water inlet
tap after each wash programme is finished.
NOTE: Aquastop water spout is used
in some models. In case of using
Aquastop, a dangerous tension exists.
Do not cut Aquastop water spout. Do
not let it get folded or twisted.