Kleenmaid DW6020, Инструкция по эксплуатации

Страница: 36 / 40

If the dishes on't dry
•
A programme without a dry operation selected.
•
Rinse aid dosage set too low
•
Dishes unloaded too s n .
If there are rust stains on the dishes
•
Stainless-steel quality of the u ensi s washed is insufficient.
•
e ec i e
mains
e
grounding.
Call an authorised service technician if the problem still persists after the controls or in
case of any malfunction not described above.
1. Whenever you will not be operating your machine
•
Unplug the machine and then turn the water off.
•
Leave the door slightly ajar in order to prevent the formation of unpleasant smells.
•
Keep the machine interior clean.
2. Eliminating water droplets
•
Wash the dishes with the intensive programme.
•
Take all of the metal containers in the machine out.
•
Do not add detergent.
3. If you properly place your dishes into the machine, you will be using it in the best way in terms
of energy consumption, washing and drying performance.
4. Clean all rough waste before you place dirty dishes to the machine.
5.
Operate the machine
n
after it
h s been
completely f
i ed i h dishes
.
6. Use pre-washing program only when necessary.
7. Observe program information and average consumption values table when selecting a
program .
8.
Since the machine will reach high temperatures, it should not be
c ed
near refrigerator.
PRACTICAL AND USEFUL INFORMATION
34
9.
If the appliance is located in a place where the risk of freezing exists, you must completely drain
the water that has remained in the machine. Turn off the water tap, disconnect the water inlet hose
from the tap and allow the interior water to drain
.