Kleenmaid DW6020, Инструкция по эксплуатации

Страница: 33 / 40

Spray arms
Check whether or not the holes for the upper and
lower spray arms are clogged. If there is any
clogging, remove the spray arms and clean them
under water.
You can remove the lower spray arm by pulling it
upwards, while the upper spray arm nut can be
removed by turning the nut to the left.
Be sure that the nut is
u
tightened when
refitting the upper spray arm.
Hose filter
Water is
c e ned
by the inlet hose filter so as to avoid any damage to your machine
due
contamination (sand, clay, rust etc.) that might be occasionally carried in through the mains water
supply or the indoor plumbing, and to
id such b e s as yellowing and formation of deposits
after washing. Check the filter and the hose from time to time and clean them if necessary. To clean
the filter, first turn off your
e in e tap and then remove the hose he . After removing the
filter from the hose, clean it under the tap. Insert the cleaned filter back into its place inside the hose.
Refit the hose.
31