Instruction
Manual
ESG
85
Plus
page
11
_____________________________________________________________________________
2. Labels
On the labels fixed on the housing of the tool you’ll find the type specification name of the
manufacturer and the company logo. On the opposite side of the housing you’ll find a label
with a brief presentation of the scope of manageable cross-sections for copper and
aluminium and the cutting force. The serial number is on the hydraulic cylinder between the
housing and the cutting head. On the cutting head you’ll find a warning against possible
injuries during the cutting process.
3. Warranty
If correct operation is guaranteed our warranty is 12 months from the time of delivery.
4. Description of the electric-hydraulic cutting unit
4.1. Description of the components
The electric-hydraulic cutting unit type ESG 85 PLUS is a hand guided tool and consists of
the following components:
Table 1
Pos.-
No.
Description Function
see
page
1
Trigger
switch to start the cutting operation
pp 13, 14, 17
2
Retract button
button to open the blades in case of
emergency or an handling error
pp 14, 17
3
Flap lock
flap to open or shut the cutting head
p 14
4
Cutting head
compact cutting head for linear
movement of the blade
pp 13, 14, 18
5
Housing
ergonomically formed plastic housing
p 2
6
Light diode display indicator for tool functions and battery
charge control
pp 13, 15, 17
7
Battery cartridge
rechargeable 2,6 Ah NiMH battery
(RA4)
pp 13, 15,
16, 18
8
Ring
Loop to secure the tool and/or assembly
purposes
p 2
9
Hand guard
Removeable guard to protect the
operating hand, not designed for
transportation
p 2
10a
Flap blade
stationary counter blade
pp 14, 15
10b
Moving blade
moving blade attached to the piston
pp 13, 14, 15
4.2. Brief description of the important features of the unit
- The unit is equipped with a special brake which stops the forward motion of the
piston/blade (Pos.-No. 10b) when the trigger (Pos.-No. 1) is released.
- The unit is equipped with a double piston pump which is characterised by a rapid
approach of the blades (Pos.-No. 10) towards the connector and a slow cutting motion.
- The cutting head (Pos.-Nr. 4) can be smoothly turned by 360° around the longitudinal
axis in order to gain better access to tight corners and other difficult working areas.
- The ESG 85 PLUS is equipped with a microprocessor which indicated service intervals,
internal checks and low battery charges.
