13
Assembly
1. Lay the main ur1it(Pl) on an even surface
2. Take wire (P2) pass it down the middle of the support tube. Please pay attention to have
larger connector at the top. Please see the picture carefully (P2)
3. When you assemble the main support tube, make sure the wires remain connected.
Than, Connect the bottom connector of wire with the wire in the main unit. Please See
the picture (P3) and make sure the wires remain connected.
4. Now, slot the main support tube into the main unit, please see picture P4 Pay attention
to use correct tools and screws : Hexagon screws 8x30 The picture P5 shows how the
main support tube should look like when connected and assembled.
Содержание 10026397
Страница 1: ...10026397 10026398 Vibrationstrainer ...
