KKT KOLBE IND8000RL, Инструкция по установке и эксплуатации, Страница: 61 / 64

61
EN
Installation
9.5 Connecting the hob to the mains power supply
• The connection to the power supply must be carried out by a
qualified electrician in accordance with the relevant standard
or with a single-pole circuit breaker, as described below:
• The electrical connection must be made properly and
in accordance with the applicable safety regulations.
• If the appliance is being connected directly to the mains supply,
an omnipolar circuit breaker must be installed with a minimum
gap of 3mm between the contacts.
• To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and
fire.
• If the cable is damaged or needs to be replaced, this must be done by
a qualified electrician with the correct tools to avoid any accidents.
• The installer must use the H05GG-F power cord.
• The cable must not be kinked or pinched.
• The cable must be checked regularly.
32A
1 × 220-240V ~
16A
2 × 230V~, 2N~
Note:
Hob blue and grey
connect in box on blue clamp.
Black on L1 ,
Brown on
L2
.
Blue and grey do
not
disconnect!
If you are not sure, please con-
tact customer service.
Appliance is not suitable
for operation with an
EU plug!