63
EN
Rinsing programs
!
!
1. Slowly
open
door of the appliance.
2. Wait about a minute until fully opening the door, so you can be sure that
the
spray arms stop working
.
3. Press the
program selector
button and hold it down for
3 seconds
to cancel the rinsing program. Then press it again to select the rinsing
program.
4.
Select
the program you want to use.
5.
Close
the door firmly until you hear a click of the door lock.
6.
After a few seconds you will hear how the machine fills with water and
the wash cycle begins.
1. The audio signal will ring 6 times.
2.
Turn the dishwasher off using the ON/OFF-button
.
3. Before taking out the dishes we recommend that you wait at least
five
minutes
in order to avoid taking out dishes that still may be hot or
fragile. The dishes are also dry better if you leave it longer in the open
dishwasher.
4. Open the door and take the dishes out.
1.
Slowly
open the door of the dishwasher and wait until the spray arms
stop working. (Risk of burns)
2. Now you can fully open the door and additionally load the dishes in the
dishwasher.
Changing of the washing program should be carried out imme-
diately after the start of the program, otherwise the tablets
could be already solved or hot water may be leaking.
The additional loading of the dishes in the dishwasher is only possi-
ble when the washing program has just been started, otherwise the
detergent and the water may leak.
4.2 Changing the rinsing program
4.3 At the end of the rinsing program
4.4 Additional loading of dishes
