37
Connection and installation of the appliance
EN
Power connection
Before connecting, check if the voltage indicated on the
rating plate corresponds to the mains voltage.
•
The length of the connection cable must be sized so that
the device can be connected prior to insertion.
•
The protective conductor must be dimensioned in such a
way that it is only subjected to tensile stress after the live
wires of the connecting cable, if the strain relief fails.
!
Connection and installation of the appliance
Dimension drawing
Installing the appliance
•
The stability of the furniture must comply with DIN 68930.
•
On the built-in niche no back wall may be present, so that
the ventilation is ensured.
•
Push the device all the way into the niche.
•
Open the oven door and fasten the left and right with the
supplied screws on the cabinet. Do not overtighten the
screws.
560
560
0
+5
59
0
0
+5
565
50
150
150
550
0
+5
ø
60
595
59
5
