15
20
6.4 Disassembly of control panel
6.4.1 Remove the control panel from oven
WARNING:
1 Turn off the electrical power supply to the appliance prior to servicing it. Failure to
disconnect the power supply during service may result in an electrical shock or fire
hazard.
2 Access the control panel requires that oven's control panel cover and control panel
back cover were removed. When the covers were
removed, the oven’s printed circuit
assemblies are exposed. The printed circuit assemblies contain electronic
components that are sensitive to electro-static discharge (ESD). So you must wear a
properly grounded antistatic wrist strap when touching or servicing the control panel.
Step 1
: Disassemble the control panel cover and the control panel back cover by removing
the fixed screws.
Step 2: Disconnect the wires from the back of the control panel printed circuit board
assembly. For the sake of reassembly convenience, please mark the connection positions
before moving the wires.
If some models that there is an energy controller inside
the product, it’s necessary
to remove
it from the probe bracket, and pull it out of the cavity hole. (Model: 65CME\65CNE
\65DME\65DNE\65DEE)
Step 3: Grab the sides of control panel with both hands with a gentle rocking motion, lift it
upward and pull it forward until it comes loose from the front of the oven buckles. (Please
see the illustrated pictures below.)
(Model: EB8005ED, EB8010ED)
