1
PART NAME
DUCT (A)-1
DUCT (A)-2
DUCT (A)-3
DUCT (B)
DUCT (C)
STOPPER
SASH (SIDE)
SASH (U AND L)
CUSHION (A)
CUSHION (B)
SCREW (A)
SCREW (B)
Q'TY
1
1
1
1
1
2
2
2
1
1
10
4
DUCT (A)-1
DUCT (A)-2
DUCT (A)-3
DUCT (B)
STOPPER
DUCT (C)
SASH
(U AND L)
CUSHION (B)
(thick)
CUSHION (A)
(thin)
(FOR ACTK27)
IMPORTANT:
This Built-In Kit is designed for use with those Dacor Microwave Ovens specifying ACTK27 or
ACTK30 Built-In Kit on rating label on the front of the oven.
READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING
INSTALLATION!
INSTALLATION INSTRUCTIONS
* For walls other than wood, you may need appropriate screws to install the SASH and STOPPER.
* Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing a kit.
Also remove the turntable tray and turntable support from the oven cavity.
* Because these kits are metal, due caution should be used in handling and installation to avoid the
possibility of injury.
* Two wooden supports must be provided, nominal 2"x 2"x 15
5
/
8
" (actual 1
9
/
16
"x1
9
/
16
"). Contact cement is
needed for attaching. These items can be purchased from a building supply store. Check to see that the
actual height of the wood is 1
9
/
16
" (4.0 cm).
SASH (SIDE)
SCREW (A)
SCREW (B)
(FOR ACTK30)
ACTK27
BUILT-IN KIT MODELS
ACTK30
followed by letter indicating color S=stainless steel, R=arctic white, B=black
Part No. 900930 Rev. C
ACTK27S/R/B 30S/R/B
11.8.12, 0:40 PM
1
