kiwy SLF 123, Инструкция по эксплуатации

Страница: 19 / 158

5
G
B
j - Button for releasing/loosening the harness' belts
k - Belts
l - Isofix connectors group
m - Safety harness connector
Checking the vehicle seat belt ( Fig. 2)
Your child seat must only be installed forward facing using a three point
seatbelt (1) (2) with retractor, in the front or rear
seats of the vehicle.
Checking the vehicle seat belt buckle ( Fig. 3, 4).
The position of the seat belt buckle can affect the stability of the
child safety seat. If the buckle lies across the seat as shown in the picture,
this child seat is not suitable for use with this seat belt or this vehicle.
USE OF THE CAR SEAT DEPENDING ON THE CHILD'S WEIGHT ( Fig.5,6)
With the child seat harness
- From 9 to 18 kg ( from 9 months to 4
years of age approximately).
With the car safety seat belt - From 15 to 36 Kg (from 4 to 11 years
of age approximately).
Warning: Use this child seat ONLY for securing your child in your
vehicle.
This seat CANNOT be used against the direction of travel.
Place the child seat on the appropriate vehicle seat.
Make sure that the vehicle’s backrest is blocked in the upright position
Ensure the vehicle seat is adjusted in the most rearward position.
Always observe your country regulations.
IV. Fitting Instructions
Make sure that the seat on which you intend to fit the child car seat is
suitable, particularly with regard to space and correct safety beltpath.
Ensure that the safety belt is not twisted and that the slack is recovered
by the retractor.
Headrest Adjustment (Fig.7) : The headrest is adjustable independently of
the backrest. Keep it in the lowest position for children from 9 to 18 Kg.
and move it to the highest position for children over 18 kg.