k
iwitec Confidential Documentation 17
CAUTION Do not place or store in the following areas:
» Areas exposed to direct sunlight
» Areas subject to direct flames or heaters, as well as areas in which hot air accumulates and creates extremely high
temperatures
» Areas exposed to static electricity
» Areas exposed to strong magnetic fields
» Areas exposed to water leakage
» Areas subject to condensation or wet areas
» Areas exposed to excessive vibration » Areas exposed to excessive smoke, dust or dirt.
CAUTION Other Precautions:
» Use the unit in the specified operating environment. Do not use it for any purpose other than for which it
was designed.
» Condensation may occur inside the case when a unit is moved from one environment to another where
there is a great difference in temperature.
» Do not use the unit in wet areas or places exposed to water such as bathroom.
» Do not insert any foreign objects into any of the units' jacks.
» If the unit gets dirty, wipe it with a clean cloth.
» Make sure to remove dust and dirt from plugs of any cables.
» Battery terminals may provide insufficient contact due to age or vibration. This may lead to data loss.
» Please note that this document has been written based on the presupposition that details about contracts
with an Internet provider, specific network environments and the set-up of any other necessary equipment to
enable network connection has already been taken care of by the User and that connection has been
confirmed as workable. Kiwi technology Inc. shall not be responsible for any damages which a contractor, a
user or a third party may suffer, whether direct or indirect, due to the inability to communicate or use
communication devices.
CAUTION Notices about Sensors:
» Do not connect any sensor to the unit other than those specified by Kiwi technology Inc.
» Make sure to use sensors within the measurement range indicated in the specifications for that sensor.
» Do not connect the sensor to any data logger other than those specified by Kiwi technology Inc.
» Do not expose the sensor to a strong impact. This may adversely affect measurement accuracy and cause
damage or malfunction.
