Kiwi LAS-604V3 Скачать руководство пользователя страница 17

 

k

iwitec  Confidential  Documentation                                                                                                                              14 

 

6.

 

Certification 

FCC warning   

 

Federal Communications Commission Statement   

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:   

• This device may not cause harmful interference.   

• This device must accept any interference received, including interference that may cause undesired operation.   

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of 

the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment causes harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by doing one or more of the following 

measures:   

• Reorient or relocate the receiving antenna.   

• Increase the separation between the equipment and receiver.   

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   

• Consult the dealer or an experienced radio/TV technician for help.   

FCC Caution   

Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s 

authority to operate the equipment.   

The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or 

transmitter.   

Radiation Exposure Statement:   

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for 

this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-

located or operating in conjunction with any other antenna or transmitter. 

 

 

 

 

Содержание LAS-604V3






















Отзывы: