13
KiwiSix Upgrade Special Functions
Setting Incoming Midi
Channel
The incoming midi channel can be set to any channel from 0-16. 0=Omni 1-
16=channel number
This is set using the Global Parameter Edit A
Setting Outgoing Midi
Channel
The outgoing midi channel can be set to any channel from 1-16.
This is set using the Global Parameter Edit B
Factory Restore
Programs 1-512 can be restored to factory settings by the following action
Press and hold Write and Manual while powering the KiwiSix on.
WARNING - There will be no confirmation and
all Tones will be cleared.
The
Memory Protect must be set to off
. All the global parameters will also be set
to the default settings. The Kiwisix will stop responding for 10 seconds while the
restore is being done.
Program Update
The KiwiTechnics KiwiSix Upgrade has built in ability to update the firmware
should updates become available. This section is entered by pressing the Bank B
(Load) button while the KiwiSix is powered on. The Update file is then 'played' into
the KiwiSix using midiOX or similar program. The update progress is displayed on
the Tone Lights. Once complete the Bank D button will light and the KiwiSix
should be repowered.
WARNING -
If this procedure fails the KiwiSix could be
rendered unusable and will require a CPU board return to
KiwiTechnics for reprogramming. Use at your own risk.
The current releases are displayed on the Tone Selector lights for about 1 sec at
power on. Tone 1 - 6 display the program release and 7 - 8 display the Bootloader
release. e.g. Tone 3 & 8 would mean Prog v3 and BL v 2
www.kiwitechnics.com
KiwiSix Upgrade User Manual v3
