4
2
Safety
2.1
General safety information
The following safety instructions must be strictly observed in
order to avoid any risk or danger while working.
Even though the product is state-of-the-art, hazards can arise
if the personnel is not instructed properly, if maintenance and
installation are not performed according to the operating
instructions or if the product is used for other purposes.
For safety reasons the product is designed only for persons
over 14 years without physical limitations.
It is intended solely for the described use.
2.2
Intended use of the product
The electric kilns described in this manual, KITTEC
®
Studio-
Line
, are built exclusively for the purpose of firing, thermal
treatment and/or melting of ceramics, china, enamel, glaze
and/or glass. The maximum temperature in the firing chamber
of the kiln is 1320°C (except: SQ50 with max. 1280±30°C and
SQ70 with max. 1250±30°C).
The melting temperature of glazes and the vitrification
temperature of the clays used will dictate the firing
temperature required, invariably less than 1320 °C
(respectively for SQ50 less than 1280±30°C and SQ70 less
than 1250±30°C).
Carburizing atmospheres, endogases, exogases, chlorine,
fluorine, sulphur, metal oxides and alkaline compounds impair
the durability of the heating coils and the durability of the
insulation and reduce the maximum permissible limit
temperature.
Содержание CB Series
