15
5
Maintenance and care
Warning!
For safety reasons, the mains plug must be pulled out or any
main switch installed must be reset before any maintenance
work is carried out. It must be ensured that the kilns firing
chamber temperature does not exceed 70°C.
To guarantee safe use of your KITTEC
®
kiln the electrical
installation must be checked at least every four years by a
specialist.
Other maintenance of the kiln is limited to regular cleaning
and visual inspection for damage. Sweep the kiln and clean
the grooves where the heating elements are situated carefully
with a vacuum cleaner. After some time, the heating elements
get brittle and break easily. So please avoid toughing the
heating elements with the vacuum cleaner suction pipe.
Should glaze get in contact with the insulation bricks, it should
be removed with a suitable tool, e.g. a spatula. With further
firings the glaze would lead to further damage of the
brickwork. After each firing please check the firing chamber
for damage by accidental glaze spillage or runs.
If more than 2 cm of the brick is eroded, the area of brickwork
should be repaired as follows:
•
First carve out the damaged spot rectangular.
•
Tidily shape a new piece insulating brick.
•
Clean the damaged area with a vacuum cleaner and
•
Put in the replacement piece with high temperature
cement.
You may obtain an overview of spare parts and repair
materials from your KITTEC
®
dealer.
Advice
:
Hairline cracks in insulating bricks resulting from high
temperatures, are quite normal and will not affect the
operating efficiency of your KITTEC
®
kiln.
Содержание CB Series
