KITO CX003, Руководство по разборке и сборке

Страница: 9 / 20

9
Disassembly Procedure
(continued from the previous page)
(2) Pull out the Top Pin to remove the
Top Hook Set.
Top Pin
Top Hook Set
(1) Turn the Body as shown in the right
figure. Remove four sets of Socket
Head Cap Screws and Conical Lock
Washers, and then remove the Gear
Case Assembly.
Conical Lock Washer
Gear Case Assembly
Socket Head Cap
Screw
4 mm
Disassembly of Gear
3
(4) Remove two Socket Head Cap
Screws on the lower side, and then
remove the Chain Guide.
(3) Remove two pieces of Gear #2, Pinion and Load Gear.
Load Gear
Pinion
Gear #2
Socket Head Cap Screw
Spring Lock Washer
4 mm
Chain Guide
To facilitate disassembly, place the
hoist Body on wood blocks with
the pinion set between the blocks.
To facilitate disassembly, loosen two Socket Head Cap Screws on the upper side first.