KITO CX003, Руководство по разборке и сборке

Страница: 18 / 20

18
Preoperational Check
Before use, ensure you check the following when disassembly/reassembly is completed.
(1) Ensure that there is no missing part. If there is any, disassemble/reassemble the hoist again
correctly.
(2) Perform daily check. Refer to the Owner's Manual for details.
(3) Before performing the following operational test under the rated load, ensure to check that
the hoist has no defect when subject to no load.
Preoperational Test
When assembly is completed, check the
operation to confirm that the Chain Hoist
works correctly.
Failure to do so may result in death or severe
injury.
Item Method Discard limit or criteria Action
No load
test Repeat lifting and
lowering a few times. • The Chain Hoist should be operated
with a light pulling force.
• The Chain Hoist should have regular
click sounds of Pawl when lifting.
Disassemble the
Chain Hoist to verify
that the hoist is
assembled properly
and the components
are free of defects.
Rated load
test Lift and lower the rated
load for 20 to 30cm.
Perform the items in
the "Basic function" of
Monthly Inspection. • The Chain Hoist should have regular
click sounds of Pawl and run smoothly
when lifting.
• The sound should be at a constant level
with no irregular clicks.
• The Chain Hoist should make no sound
when lowering.
• It should be free of a heavy pulling
force.
• It should be free of slip in braking.
(2) Align the Latch with the hole of the
hook for the Latch fitting, and fasten
it with a Socket Head Cap Screw
and a Hexagon Nut.
Ensure that the Latch can move
smoothly.
Hexagon Nut
Latch
Socket Head
Cap Screw
3 mm
7 mm