KitchenAid KSVC 3610, Инструкция по эксплуатации

Страница: 17 / 20

17
General reminders
• This manual is an integral part of the appliance and provides all the necessary information for correct
installation and maintenance of the appliance.
• This manual must be kept in a safe, accessible place for convenient consultation by all authorized users
(installer, user, maintenance technician).
• Installation must be carried out exclusively by an authorized, qualified technician, who must comply
with the instructions and recommendations in this manual.
• The installer must also observe local fire prevention regulations.
• The vacuum pump contains oil. Always keep the packing and the appliance in an upright position in
order to prevent oil leaking from the pump valve.
• The appliance must be handled by two or more people.
• Always use protective gloves during handling and installation operations.
• Packaging materials are potentially dangerous for children and animals: do not allow them to play with
them!
• Avoid positioning in closed areas with high temperatures or poor ventilation, in direct sunlight or in
contact with atmospheric agents, or near heat sources.
Electrical connection
The earthing of this appliance is compulsory by law.
• Electrical connection of the appliance must be carried out by a qualified electrician, in compliance with
the manufacturer's instructions and current local safety regulations.
• The installer is responsible for the correct electrical connection of the appliance and the observance of
the relative safety recommendations.
• The power cable must be long enough for connecting the appliance, once fitted in its housing, to the
power supply. During installation, make sure the appliance does not crush, cut or damage the power
cable.
• In order to comply with safety directives, the appliance must be fitted with a multi-pole switch with a
minimum contact gap of 3 mm.
• Do not use multiple adapters or extension leads.
• The electrical components must not be accessible after installation.
• Check that the voltage on the rating plate corresponds to the voltage in your home. The data plate is
located on the left hand side of the appliance (visible when the machine is pulled out).
• Power cable replacement (see table) must only be carried out by authorised After-sales Service.
Power supply cable table
N. of conductors Type of cable
IN ~ + H05 RR-F 3x 1,5,mm 2