OPTIONAL FUNCTIONS
All these functions are activated by pressing the
Menu button.
Each press of the button corresponds to a function.
Press to activate the required function, then
confirm with the OK button.
Party mode
This function is activated by pressing the menu
button until the party mode symbol is displayed.
The symbol flashes; press OK to confirm. Use this
function to chill drinks inside the freezer
compartment. When the function is activated, the
symbol is animated. 30 minutes after activation (the
time required to chill a 0.75 l bottle without the
glass breaking), the symbol flashes, an acoustic
signal sounds, the display light comes on and the
alarm indicator is lit up and displayed. At this point,
remove the bottle and deactivate the function by
pressing the OK button
Important
: Do not leave the bottle inside the
freezer compartment longer than the time
necessary for chilling.
Control panel lock function
This function prevents accidental changing of
appliance settings or switching off.
To lock the control panel, press the freezer temp
and fridge temp buttons at the same time for 3
seconds until the symbol lights up: an acoustic
signal confirms activation.
To deactivate the function, carry out the same
procedure until the symbol goes off.
Fast freezing
This function must be activated before freezing
fresh food. To activate the function, press the menu
button until the fast freeze symbol appears. The
symbol flashes and the symbol of the relative door
lights up; press OK to confirm. The function is
automatically deactivated after 24 hours, or
manually by repeating the operation.
Ice cube selection
This function is used to select the type of ice:
crushed or cubes. For further information refer to
the section: “Using the ice dispenser”.
Automatic ice-maker control panel lock
This function consists of deactivating ice and water
dispensing for easier cleaning or to prevent
unintentional use.
It is set by pressing the Ice Mode and Light buttons
at the same time for 3 seconds until the symbol
lights up; an acoustic signal confirms activation. To
deactivate the function, carry out the same
procedure until the symbol goes off.
Note
: The deactivation function does not
disconnect the power to the appliance, ice-maker
or light, but simply deactivates the dispenser
levers.
Fast cooling
This function must be activated before chilling fresh
food. The function is activated by pressing the
menu button until the fast cooling symbol appears.
The symbol flashes and the refrigerator door lights
up on the display; press OK to confirm. The
function is automatically deactivated after 6 hours,
or manually by repeating the operation.
Note
: When selecting the required function, the
user has 5 seconds to select and then confirm by
pressing OK, otherwise it is necessary to start
again by pressing the menu button.
Vacation
This function deactivates the refrigerator
compartment if the user is going away for some
time. The function is activated by pressing the
menu button until the vacation symbol appears.
The symbol flashes and the refrigerator
compartment will not display the temperature;
press OK to confirm. To reactivate the refrigerator
compartment, repeat the operation.
Important
: After activating the function, remove
perishable food from the refrigerator compartment
and keep the door closed, since the refrigerator
maintains an adequate temperature for preventing
the formation of odours.
Important
: The “fast cooling” function cannot be
activated when the VACATION function is
switched on.
Using the appliance
16
5019_715_02010_GB_IFU_SbS.qxp 12-03-2007 9:36 Pagina 16
