www.kitchenaid.com.au | www.kitchenaid.co.nz
Page | 4
Product description and symbols
1. Removable grids
2. Auxiliary burner
3. Rapid burner
4. Auxiliary burner control knob
5. Rapid burner control knob
Control Symbols
Off
Maximum flame
Minimum flame
Using the burners
To turn on one of the burners:
1. Turn the corresponding control knob
anticlockwise until the indicator coincides
with the maximum flame symbol
.
2. Press the control knob to ignite the burner.
3. Once the burner has lit, keep the control knob
pressed for about 5 seconds to allow the
safety thermocouple fitted to each burner
to engage. The thermocouple will switch off
the gas supply to the burner should the
flame be accidentally lost (A gust of air,
momentary interruption of gas supply or
liquid spillage etc.).
If the burner does not ignite within about 15
seconds, switch off the burner, check the fitting
of the burner cap and plate for correct fitting.
Wait at least 1 minute before trying again.
If the burner goes out when the control knob is
released, the thermocouple did not engage. Wait
at least 1 minute before repeating steps 1 to 3.
