KitchenAid KGRA806P, Техническое образование

Страница: 17 / 84

2-5
c) Use an 8 mm socket and carefully re-
move the orifice spud from each of the
three standard surface burners.
Orifice Spud
Continued on the next page.
Internal
Burner
Orifice
3. To convert the TripleTier

Crown
burner:
a) Remove the grate and burner caps from
the cooktop.
b) Remove the four T-20 torx screws from
the burner ring and remove the ring.
Burner Ring
Screw (1 of 4)
c) Remove the three T-20 torx screws from
the burner cover and remove the cover.
Burner Cover
Screw (1 of 3)
d) Remove the two T-20 torx screws from
the orifice cover and remove the cover.
Orifice Cover
(2 Screws)
e) Use a 7 mm nut driver and remove the
two burner orifices.
External
Burner
Orifice
4. Install the L.P. gas orifices in the burners
as shown in the following charts (do not
overtighten them).
Rating Color Size Burner
5,000 B.T.U. Red 0.70 mm RF & LR
10,000 B.T.U. Blue 0.95 mm RR
13,000 B.T.U. Green 1.10 mm LF
Rating Color Size Burner
11,800 B.T.U. Brown 1.00 mm External
2,200 B.T.U. Orange 0.42 mm Internal
Standard Burners
TripleTier

Crown Burner