background image

INSTALLATION INSTRUCTIONS 30" (76.2 CM)

FREESTANDING ELECTRIC RANGE  

WITH DOUBLE OVENS

INSTRUCTIONS D’INSTALLATION POUR 

CUISINIÈRE ÉLECTRIQUE AUTOPORTANTE  

AVEC FOURS DOUBLES DE 30" (76,2 CM)

RANGE SAFETY .............................................................................1
INSTALLATION REQUIREMENTS .................................................2

Tools and Parts .............................................................................2
Location Requirements ................................................................2
Electrical Requirements - U.S.A. Only .........................................4
Electrical Requirements - Canada Only .......................................5

INSTALLATION INSTRUCTIONS ...................................................5

Unpack Range..............................................................................5
Adjust Leveling Legs ....................................................................5
Install Anti-Tip Bracket .................................................................6
Electrical Connection - U.S.A. Only .............................................7
Verify Anti-Tip Bracket Is Installed and Engaged ......................12
Level Range ................................................................................12
Complete Installation .................................................................13
Moving the Range ......................................................................13

SÉCURITÉ DE LA CUISINIÈRE ...................................................14
EXIGENCES D’INSTALLATION ...................................................15

Outils et pièces ...........................................................................15
Exigences d'emplacement .........................................................15
Spécifications électriques ..........................................................17

INSTRUCTIONS D'INSTALLATION .............................................17

Déballage de la cuisinière ..........................................................17
Réglage des pieds de nivellement .............................................17
Installation de la bride antibasculement ....................................18
Vérifier que la bride antibasculement  

est bien installée et engagée .....................................................18
Réglage de l'aplomb de la cuisinière .........................................19
Achever l’installation ..................................................................20
Déplacement de la cuisinière .....................................................20

Table of Contents/Table des matières

W10694065B

IMPORTANT:

 

Save for local electrical inspector's use.

IMPORTANT :

À conserver pour consultation par l'inspecteur local des installations électriques.

RANGE SAFETY

You can be killed or seriously injured if you don't immediately 
 

You

 

can be killed or seriously injured if you don't follow 

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

Содержание KFED500EWH03














Отзывы: