KitchenAid KBGN274PSS Скачать руководство пользователя

Страница: 13 / 48

Using the rotisserie

For best cooking results, do not use main
grill burners when using the rotisserie.

The rotisserie system is designed to cook
food from the rear using intense, searing
infrared heat.

1. Remove warming shelf.

2. Mount rotisserie motor on the grill's

mounting bracket. Position it securely
into support bracket slots.

3. To load the spit rod, slide one of the

rotisserie forks onto the spit rod with
prongs facing away from handle.

4. Push spit rod through the center of the

food, then slide second rotisserie fork
into position.

5. Center the food and rotisserie forks on

spit rod and tighten wing nuts on the
rotisserie forks. If necessary, secure
loose food portions with butcher's
string only.

6. Once the food is positioned on spit rod,

place pointed end of rod into rotisserie
motor and lower spit rod onto supports
at either side of the grill.

IMPORTANT: On Models KFGR292PSS,
KFGR382PSS and KBGN292PSS, remove the
handle from the spit rod
when using the side
burner. The handle will
get “HOT” and failure to
remove it will cause the
handle to crack and
melt.

7. Plug single-prong plug into rotisserie

motor.

rotisserie

fork

motor

spit rod

rotisserie burner

8. Plug 3-prong plug into a grounded

3-prong outlet.

To avoid product damage when not using
the rotisserie, remove motor and store
indoors. Remove spit rod and forks. Store
out of reach of children.

Lighting the rotisserie burner

1. Push in and turn rotisserie burner knob

to “LITE”. You will hear a “snapping”
sound.

2. Push the red button in.

3. When rotisserie burner lights, continue

pressing the red button for another 5 to
10 seconds, and turn knob away from
“LITE” to “HI”.

IMPORTANT:

If the rotisserie burner does not light
immediately, turn the burner knob to “OFF”,
wait 5 minutes before relighting.

Electrical Shock Hazard

Plug into a grounded 3-prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions
can result in death, fire, or
electrical shock.

WARNING

Manually lighting rotisserie burner

1. Remove the manual lighting extension

from inside the drip tray.

2. Attach a match to the clip.

3. Strike the match to light it.

4. Carefully hold the lit match close to the

rotisserie burner.

5. Push in and turn the rotisserie burner

control knob to “LITE”.

6. Push in the red button above the

rotisserie burner control knob, the
burner will light immediately. Hold this
button in for 5 to 10 seconds, and turn

Using the smoker box

The smoker tray is designed for easy use.
After deciding which wood chips to use,
follow the instructions on wood chip
packaging. Small size chips or pellets are
recommended.

1. Slide box and chip cover out of smoker

compartment.

2. Remove cover

from box. Turn
cover over and
fill with
prepared
chips.

3. Turn smoker box over and place over

chip cover. Hold cover and box together
and turn right side up.

4. Slide box and cover back into smoker

compartment after lighting the smoker
burner.

Light the smoker burner 5 minutes ahead
of time to start it smoking. The specially-
designed smoker will smoke the food
while the grill burners or rotisserie cooks
it. Keeping the hood closed as much as
possible will maximize the smoking effect.

Lighting the smoker burner

1. Push in and turn smoker burner knob

to “LITE”. You will hear a “snapping”
sound.

2. When smoker burner lights, turn knob

away from “LITE” to “HI”.

IMPORTANT:

If the smoker burner does not light
immediately, turn the burner knob to “OFF”,
wait 5 minutes before relighting.

WARNING

Burn Hazard

Do not remove the smoker box
when grill is hot.

Doing so can result in burns.

knob away from “LITE” to “HI”.