16
®
Attachments and Accessories
To Attach
1. Turn stand mixer off and
unplug.
2. Loosen attachment knob by
turning it counterclockwise.
3. Flip up hinged hub cover.
4. Insert attachment shaft housing
into attachment hub, making
certain that attachment power
shaft fits into square attachment
hub socket. It may be necessary
to rotate attachment back and
forth. When attachment is in
proper position, the pin on the
attachment will fit into the
notch on the hub rim.
5. Tighten attachment knob by
turning clockwise until
attachment is completely
secured to stand mixer.
6. Plug into a grounded 3 prong
outlet.
To Remove
1. Turn stand mixer off and
unplug.
2. Loosen attachment knob by
turning it counterclockwise.
Rotate attachment slightly back
and forth while pulling out.
3. Replace attachment hub cover.
Tighten attachment knob by
turning it clockwise.
General Information
KitchenAid
®
Attachments are designed to assure long life. The attachment
power shaft and hub socket are of a square design, to eliminate any
possibility of slipping during the transmission of power to the attachment.
The hub and shaft housing are tapered to assure a snug fit, even after
prolonged use and wear. KitchenAid
®
Attachments require no extra power
unit to operate them; the power unit is built-in.
‡Not part of mixer.
General Instructions
Attachment
Hub Socket
Attachment
Knob
Notch
Pin
Attachment Shaft
Housing
Attachment
Power Shaft‡
Hinged
Hub Cover
Attachment
Housing
Содержание KB26G1X
Страница 1: ...5 6 QUART STAND MIXER INSTRUCTIONS AND RECIPES 1 800 541 6390 Details Inside 9707946B ...
Страница 85: ......
Страница 86: ......
Страница 87: ......