KitchenAid 720-0745, Инструкция по установке и руководство по эксплуатации и уходу

Страница: 16 / 107

16
Change the Rotisserie/Infrared Burner Orifice
1.
Using a Phillips screwdriver, unscrew the 2 screws and
remove the rotisserie/infrared burner wind baffle
.
2. Using a Phillips screwdriver, remove the 4 screws at the back
of grill from inside the grill (2 screws on each side of the
rotisserie infrared burner)
.
3.
Remove the access cover at the back of the grill hood by
removing the 4 screws (2 screws on each side of the rotisserie
infrared burner)
.
4. Using a Phillips screwdriver, remove the 2 screws holding the
spider guard to the burner.
5.
Use 24 mm wrench to remove the orifice nut
.
6. Take out the orifice support, and then use a 6 mm socket and
wrench or 6 mm nut driver to remove the LP orifice at the end
of the supply pipe. Replace with Natural gas orifice
.
IMPORTANT: Check that the orifice is properly installed inside
of the supply pipe.
7. Reinstall the spider guard, access cover, and wind baffle.
A. Wind baffle
A. Access cover
A
A
A. Orifice nut
A. Orifice support
B. Orifice
A
A
B