6
SETTING UP YOUR STAND MIXER
SETTING UP YOUR STAND MIXER
Assembling your Stand Mixer
To attach bowl
1. Turn speed control lever to “0” (OFF).
2. Unplug Stand Mixer or disconnect power.
3. Raise guard.
4. Place bowl lift lever in down position.
5. Fit bowl supports over locating pins.
6. Press down on back of bowl until
bowl pin snaps into spring latch.
NOTE: If bowl is not securely snapped into
place, the bowl will be unstable and wobble
during use.
7. Lower guard.
8. Raise bowl before mixing.
To remove bowl
1. Turn speed control lever to “0” (OFF).
2. Unplug Stand Mixer or disconnect power.
3. Raise guard.
4. Place bowl lift lever in down position.
5. Remove flat beater, wire whip, or
dough hook.
6. Grasp bowl handle and lift straight up
and off locating pins.
To raise bowl
1. Rotate lever counterclockwise
to straight-up position.
2. Bowl must always be in raised, locked
position when mixing.
W10878937B_ENv05.indd 6
7/27/17 8:17 AM
