MA0886RHG
34
9-4. Attachment of cylinder
・
When removing/installing the cylinder, use a lifting belt and perform as follows. (Fig.13)
1. To lift up the cylinder, engage a lifting belt with the draw bar and lift up the cylinder
while supporting it.
2. Insert the draw bar into the spindle.
3. When a lifting belt comes close to the spindle, shift the lifting belt toward the
cylinder.
4. When the draw bar has entered the spindle sufficiently, re-engage a lifting belt with
the cylinder body and fit the cylinder closely to the spindle and then install the
cylinder with the cylinder mounting bolts.
Detach in the reverse procedures of attachment.
Fig.13
・
Use a lifting belt when attaching and detaching the cylinder to and from the
machine, as there is a danger of injury or damage if the cylinder drops.
・
Use the belt in the center of gravity not to lose the balance, and lift the draw
pipe slowly. If balance is bad, the belt slips, and the cylinder drops, and there
is the injury danger such as blows.
