KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-750RT
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: +91.80. 6835 7800
Page 12 of 36
can carry out such multifunctional work: bailing, sprinkling, chemical spraying, threshing, reaping,
and generating power.
OPERATION
Ⅰ
Up packing assembly(Picture4)
Picture4
1.
Road wheels installation install the connect socket to the wheels install road wheels on both
sides of hexagonal shaft and fix the wheels with 2 bolts M8×55, 2 nuts M8.
2.
Traction frame installation install the connection frame to the traction frame with big pin insert
it into the open pin insert the resistance knife to the connect square snot choose proper height
and fix it with latch.
3.
Handlebar installation: turn the two fluted discs on the handlebar to right with the fluted discs
on both sides of the disc plate. Pay attention to adjust handlebar position. Connect it with
auxiliary bolts M16×140 and gasket 16, then fixes the clutch cable, gun cable and backshift
cable on the handlebar with wire dip.
4.
Shift lever installation: take away the pins between the shift lever and connecting shelf to get
the shift lever and adjust it to “0”.
5.
Toolbox installation install the toolbox onto handlebar fix it with 2 bolts M8 x 16.
6.
Battery installation put the battery to the battery box fix it onto the battery box with 2 battery
fixing bar, 1 battery cross bar and 2 butterfly shaped nuts.
7.
Installation of engine cover install the front part of engine cover to the threaded hole of engine
outer case use 2 M8×16 nuts to fix the end part to the thermal board of battery.
