KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-750RT
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: +91.80. 6835 7800
Page 14 of 36
1.
Backshift cable adjustment(Picture5 and 6)
2.
Unlock the fasten nuts on the screw rod.
3.
Instantaneously rotate the screw rod to show the shortest part of the handlebar.
4.
Thread the cable into the backshift shaft at the side of gear box and make sure
the cable head is in the big hole of shaft.
5.
Properly counterclockwise rotate the backshift fork shaft, thread the cable into
the narrow slit of backshift plug through the side of the gear box and make sure
the cable head is in the big hole of the plug.
6.
Rotate out the screw rod and holdfast it repeatedly, unlock the backshift bar.
When spring force can reposition the bar, you should fasten the nuts.
1.Use of emergency stop handle (look at picture5)
Emergency stop handle must be pressed down when starting the engine release the
handle when anything emergent happens the engine will stop immediately to prevent
dangerous things happen.
2.gun cable adjustment(look at picture7) Diagram
1.
Turn gun switch to the fastest position.
2.
Thread the steel wire-rope of the gun into the pole
and plug of regulation panel of the diesel engine
gun.
3.
Fasten the steel wire-rope and fix the screw.
4.
Adjust the gun switch repeatedly until the gun bar
of the regulation panel can be in the fastest or
slowest position.
Ⅲ
Checking and Refueling
Name
Moment(N.M)
Flange and diesel engine
2
0
～
25
Flange and gear box
35
～
40
Bolts behind the main shaft of gear box
10
～
12
Bolts on the backshift shaft of gear box
26
～
40
Bolts between the engine frame and running case
35
～
40
Bolts on the end cover of running gear
10.6
～
15
Bolts on the drag bar of running gear
50
～
60
Bolts between the running gear and gear box
35
～
40
Drag bar
45
～
60
Bolts on the bottom plate of diesel engine
35
～
40
Bolts on the handlebar frame
35
～
40
