KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-400D
: +91.80. 22178200
Page 11 of 56
Assembly Instructions
1.
Fix the main machine; insert the hexagonal output shaft o
nto stepped box’s output
casing’s hexagonal hole.
2.
Fix the hexagonal stop casing onto the hexagonal output shaft with M6×6 socket
head screws, and make sure the hexagonal shaft does not move axially.
3.
Wheel fixing
: fix the wheels at the two sides of the Hexagonal output shaft, and fix
them with two M8×55 bolts and M8 nuts.
4.
Trailer fixing
: Fix the link group onto the trailer, use the link shaft assembly for
connection, insert the split pin ¢3×26 and insert the velocity adjustment screw into
square groove of the link group, and fix it with M8×55 bolts and nuts.
5.
Handle bar fixing
: Two gear discs of the handle bar support aim at the discs of the
handle bar support base, and adjust the positions. Fix them with M16×140 bolts, flat
gasket 16 and spring gasket16.
6.
Shifting bar assembly
: Get the shifting bar through the groove of shift support in
the handle bar support base, and insert it into the hole of the shift casing, then fix it
with split pin ¢3.2 ×16. Set the shifting bar in neutral position.
