KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-250D,256D,215D
: +91.80.
6835 7800
Page 35 of 50
Problem
Probable cause
Solution
Overheat
Oil in case is little
Add oil
Gears clearance too narrow
Assemble again
Axle direction clearance is too small
Adjust the clearance
Transmission box
connecting place
leak oil
Connection bolts are loose
Tighten the bolts
Oil leak out
Gasket broken
Change the gasket
Output
shaft
sleeve
outside
leak oil
Oil seal broken
Change the oil seal
Output
shaft
sleeve inner hole
leak oil
Sleeve broken
Change it
Drain hole leak oil
O ring broken
Change the O- rings
Plugs loosen
Tighten the plug
Case oil leakage
Case has some small hidden hole
Welding or paint it
6. Other problems
Problem
Probable cause
Solution
Blades broken
Hitting a stone or something hard
Change the blades
Cable broken
Worn out
Change the cable
Try to start the engine according to the instructions given above
If the engine still does not start, take the Inter-cultivator to an authorized dealer.