KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-250D,256D,215D
: +91.80.
6835 7800
Page 17 of 50
3.4.2 Pull back the shift gear rod with right hand and then turn to neutral gear. And then
use right hand to hold on reverse handle.
3.4.3 Then slowly release clutch rod so that the Inter-cultivator can go in reverse direction
! NOTE:
Don’t release reverse handle. And before turning to reverse gear, must turn
accelerator to smaller (but engine should not stop, the speed will be about 2000r/min)
which will be safer.
3.4.4 When there is no need of reverse gear, hold on the clutch and right handle, release
the reverse handle.
3.5 When Inter-cultivator
is moving, don’t shift the gear. First reduce the accelerator and
then release clutch, until Inter-cultivator stop walking, the shift gear.
3.6 Turning. Turning handle to left or right can turn Inter-cultivator.
! NOTE:
While turning, don’t hold wrong handle or rod, else, gears will be damaged.
3.7
Stop
3.7.1 Hold clutch rod, and meanwhile hold flameout switch to disengage clutch.
3.7.2 Turn shift gear rod to neutral, loosen clutch rod, then Inter-cultivator will stop
working.
3.7.3 If engine need to be stopped
Connecting the attachments
4.1 Intercultural/Weeding Operations
:
When need weeding, disassemble walking wheel, and then put blades onto both side
of axle. And use pin and clip to fix. After blades are assembled, must assemble dust
fender. Dust fender can protect. Weeding depth can be adjusted by deep resistance rod.
4.2 Ditching
:
When needed to do ditching work, take off the deep resistance rod, adjust ditching
blades height, and then start ditching work.
Ditching width: 40cm
Ditching depth: 11-25cm
5
Usage
! NOTE:
•
If you hear any strange noise while working on Inter-cultivator, stop the engine to
check.
•
When Inter-cultivator is cool, don
’t add heavy load. Especially if working with new
machine and machine which is being used after a long time/ repair.
•
Check to see if there is oil in transmission box, if no oil, please add.
•
Do not pour water on Inter-cultivator for cooling it.
•
Don’t allow the Inter-cultivator with blades move on hard road.
•
After using, clean the Inter-cultivator which will prolong the life of the Inter-
cultivator. Clean the air cleaner element periodically and change it if necessary.
Operating the Engine
1.
Break-In Of New Engine:
If your engine has not broken in yet, improper usage will shorten the life of engine. The
initial 20 hrs. is the break-in-period. The operator must obey the following:
•
Running-in for 5mins after first start.
