Chainsaw-Petrol
KK-CSP-5920/6020/6522/7524
: www.kisankraft.com
: +91.80. 22178200
Page 46 of 80
Daily Maintenance
Weekly Maintenance
Monthly Maintenance
Clean the outside of the machine.
Check the cooling
system weekly.
Check the brake band on
the chain brake for wear
out. Replace when less
than 0.6 mm (0,024 inch)
remains at the most worn
point.
Check that the components of the
throttle control work safely. (Throttle
lockout and throttle control.)
Check the starter, starter
cord and return spring.
Check the clutch centre,
clutch drum and clutch
spring for wear.
Clean the chain brake and check
that it operates safely. Make sure
that the chain catcher is
undamaged, and replace it if
necessary.
Check that the vibration
damping elements are
not damaged.
Clean the spark plug.
Check that the electrode
gap is 0.7mm
（
0.028inch
）
The bar should be turned daily for
more even wear. Check the
lubrication hole in the bar, to be
sure it is not clogged. Clean the bar
groove. If the bar has a sprocket
tip, this should be lubricated.
Lubricate the clutch
drum bearing.
Clean the outside of the
carburetor.
Check that the bar and chain are
getting sufficient oil.
File off any burrs from
the edges of the bar.
Check the fuel filter and
the fuel hose.
Replace if necessary.
Check the saw chain with regard to
visible cracks in the rivets and links,
whether the saw chain is stiff or
whether the rivets and links are
abnormally worn. Replace if
necessary.
Loosen the two M5 nuts,
remove the air intake
and air filter bracket,
clean up the sawdust
and oil. Clean up the
sawdust from the filter
element.
Empty the fuel tank and
clean it inside.
Sharpen the chain and check its
tension and condition. Check the
drive sprocket for excessive wear
and replace if necessary.
Clean the carburetor
compartment.
Empty the oil tank and
clean the inside.
Clean the starter unit’s air intake.
Clean the air filter.
Replace if necessary.
Check all cables and
connections.
Check whether the nuts and screws
are tight.
Check whether the stop switch
works correctly.
Check that there are no fuel leaks
from the engine, tank or fuel lines.
Clean the air filter and its bracket to
ensure the intake system clean and
unobstructed