manualshive.com logo in svg

KISANKRAFT KK-CSP-5920, Руководство по эксплуатации, Страница: 17 / 80

Поделиться
Скачать
KISANKRAFT KK-CSP-5920 Скачать руководство пользователя страница 17

 

Chainsaw-Petrol 

KK-CSP-5920/6020/6522/7524

 

 

: www.kisankraft.com 

: [email protected] 

: +91.80. 22178200 

 

Page 17 of 80 

 

Keep cutting equipment well lubricated and properly 

maintained! A poorly lubricated chain is more likely to break and 

lead to increased wear on the bar, chain and drive sprocket. 

 

Cutting equipment designed to reduce kickback 

WARNING

! 

  Faulty cutting equipment or the wrong combination of bar and saw chain increases 

the risk of kickback! Only use the bar/saw chain combinations we recommend, and 

follow the filing instructions. See instructions under the heading Technical data. 

  The only way to avoid kickback is to make sure that the kickback zone of the bar never 

touches anything. 

 

By using cutting equipment with “built

-

in” kickback reduction and keeping the chain 

sharp and well-maintained you can reduce the effects of kickback. 

Bar 

The smaller the tip radius the lower the chance of kickback 

 

Length (inches/cm) 

Chain 

A chain is made up of a number of links, which are available in standard and low-kickback 

versions. 

IMPORTANT!

  

No saw chain design eliminates the danger of kickback. 

WARNING! 

Any contact with a rotating saw chain can cause extremely serious injuries. 

Some terms that describe the bar and chain 

To maintain the safety features of the cutting equipment, you should replace a worn or damaged 

bar or chain with a bar and chain combinations recommended by KisanKraft. 

  Number of teeth on bar tip sprocket (T). 

 

  Chain pitch (inches). The spacing between the drive links of the chain must match the 

spacing of the teeth on

 

the bar tip sprocket and drive sprocket. 

 

 

 

 

Содержание KK-CSP-5920

















































































Отзывы:

Нет отзывов