manualshive.com logo in svg

KISANKRAFT KK-CSP-5920, Руководство по эксплуатации, Страница: 25 / 80

Поделиться
Скачать
KISANKRAFT KK-CSP-5920 Скачать руководство пользователя страница 25

 

Chainsaw-Petrol 

KK-CSP-5920/6020/6522/7524

 

 

: www.kisankraft.com 

: [email protected] 

: +91.80. 22178200 

 

Page 25 of 80 

Mixing 

1.  Always mix the gasoline and oil in a clean container 

intended for fuel. 

 

2.  Always start by filling half the amount of the gasoline 

to be used. Then add the entire amount of oil. Mix 

(shake) the fuel mixture. Add the remaining amount of 

gasoline. 

3.  Mix (shake) the fuel mixture thoroughly before filling 

the machine’s fuel tank.

 

4.  Do not mix more th

an one month’s supply of fuel at a 

time. 

5.  If the machine has not been used for some time the 

fuel tank should be emptied and cleaned. 

Chain Oil 

We recommend the use of special oil (chain oil) with good adhesion characteristics. 

1.  Never use waste oil. This results in damage to the oil pump, 

the bar and the chain

 

 

2.  It is important to use oil of the right grade (suitable viscosity 

range) to suit the air temperature. SAE20# for summer use, 

SAE10# for winter use 

3. 

This can overload the oil pump and result in damage to the 

oil pump components.

 

4.  Contact your service agent when choosing chain oil. 

 

Fueling 

 

WARNING! Taking the following precautions, will lessen the risk of fire: 

  Do not smoke and do not place any hot objects in the vicinity of fuel. 

  Always stop the engine and let it cool for a few minutes before refueling. 

  When refueling, open the fuel cap slowly so that any excess pressure is released 

gently. 

  Tighten the fuel cap carefully after refueling. 

  Always move the machine away from the refueling area before starting. 

Clean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter 

must be replaced at least once in a year. Contamination in the tanks causes malfunction. Make 

sure the fuel is well mixed by shaking the container before refueling. The capacities of the chain 

oil tank and fuel tank are carefully matched. You should therefore always fill the chain oil tank 

and fuel tank at the same time. 

WARNING! 

Fuel and fuel vapor are highly flammable. Take care when handling fuel and chain 

oil. Be aware of the risks of fire, explosion and those associated with inhalation

. 

  Never refuel the machine while the engine is running. 

  Make sure there is plenty of ventilation when refueling or mixing fuel  

  Move the machine at least 3 m from the refueling point before starting it. 

 

Содержание KK-CSP-5920

















































































Отзывы:

Нет отзывов