KISANKRAFT KK-BC2-JP30 Скачать руководство пользователя

Страница: 22 / 68

BRUSH CUTTER

KK-BC2-JP30/JP45 , KK-TC2-JP45



: www.kisankraft.com



: [email protected]



: +91.80. 22178200

Page 22 of 68

WARNING: To avoid serious injury.

Wear safety goggles, safety shoes, gloves and helmet during operation.

Nylon cutter:

Pull on the cord of the nylon cutter by 12-15 cm

Blade:

Blades can be sharpest from the edge to one third up the shaft. When mowing grass,

use two thirds

Working methods:

Since rotary blades rotates in the left direction (as seen from the top),

it is more efficient to mow grass from right to left.

WARNING: To avoid serious injury.



In case the rotary blade hits anything it should not (stone or the like),

stop the engine and check that the blade has no cracks.



Use only nylon line. Do not use any type of blade for edging or

scalping. Always check that there is a safe distance between the

cutting device and your feet.

If the cutting blade is clogged or stuck with grass, weeds or bushes. Immediately stop the

engine and remove it, paying attention to the cutting blade. Clean the cutting blade

periodically.

INSPECTION & MAINTENANCE

Inspect and maintain satisfactorily for achieving a longer life of the equipment and good

safe work. Follow these procedures.

Adjust the idle sped so that it differs sufficiently from the engine speed when the clutch is

engaged.

NOTE

: clutch-engaged rpm/idle rpm = 1.25 or more

WARNING: To avoid serious injury.



Hot engine parts can cause severe burns.



Allow engine to stop and cool before checking and servicing.



Never use damaged or faulty parts in order to prevent serious or

fatal injury.



Replace damaged or faulty parts with new parts.

Adjustment of Carburetor:



Adjust the low RPM with the idle

speed adjuster (1).



Right turns: RPM increases



Left turns: RPM decreases

Содержание KK-BC2-JP30





































































Результаты поиска

Содержание KK-BC2-JP30

Отзывы:

Похожие инструкции для KK-BC2-JP30

Бренды по названию

Популярные бренды

KISANKRAFT KK-BC2-JP30, Руководство по эксплуатации

Результаты поиска

Содержание KK-BC2-JP30

Отзывы:

Похожие инструкции для KK-BC2-JP30

Бренды по названию

Популярные бренды