KisanKraft
TM
POST HOLE DIGGER
EQ9800
: www.kisankraft.com
: +91.80. 22178200
Page 16of 20
6. Engine must be shut-off, cooled, and spark plug wire removed before any repair
or maintenance is done.
TRANSPORTING YOUR EARTH AUGER
1. Never transport the engine inside a closed space or vehicle. Fuel or fuel vapors
may ignite causing serious injury or death.
2. If fuel is present in the fuel tank, transport in an open vehicle in an upright position.
3. If a closed vehicle has be used, remove fuel into an approved red fuel container.
DO NOT siphon by mouth.
4. Run the engine to use up the fuel in the carburetor and fuel tank. Always run the
engine in a well-ventilated area.
5. Wipe away any spilled fuel from the engine and earth auger. Allow it to dry.
LONG TERM STORAGE
If your earth auger will not be used for more than one month, prepare it for long term storage.
Steps for Long Term Storage:
1.
Add fuel stabilizer according to manufacturer’s instructions.
2. Run the engine for 10-15 minutes to ensure that the stabilizer reaches the
carburetor.
3. Remove the remaining fuel from the fuel tank into an approved fuel
container.
4. Remove auger from power head and apply a thin layer of grease to the
output shaft.
5. Store auger and power head (engine) in a vertical position.
6. Remove all debris from auger and power head (engine).
SERVICE AND REPAIR
SERVICE INFORMATION
We build quality and durability into the design of our products; but no amount of careful
design by us, and careful maintenance by you, can guarantee a repair-free life for your
auger. Most repairs will be minor, and easily fixed by observing the suggestions given in the
troubleshooting guide in this manual.
The guide will help you pinpoint the causes of common problems and identify remedies.
For more complicated repairs, you may want to rely on your dealer, an authorized mechanic
or. (Contact your dealer for a list of authorized mechanics in your area.
We will always be glad to answer any questions you have, or help you find suitable
assistance.
