KisanKraft
TM
POST HOLE DIGGER
EQ9800
: www.kisankraft.com
: +91.80. 22178200
Page 11of 20
TECHNICAL SPECIFICATIONS
Products Code
EQ900B
HP
6.5 hp
CC
190cc
Engine Type
4
–
Strokes, Air cooled
Max Auger RPM
121 rpm
Fuel Used
Petrol
Fuel Tank Capacity
1000 ml
Oil (Mixing)
750 ml (20W 40 Grade) & Engine Oil should be changed
initially after 10 Hrs afterwards once in every 50 hrs of engine
run.
Gear ratio
30
Lubricating oil
20W40
Weight of the
Machine
24 kg
Consumption
1hrs/650 ml (Engine)
Work Capacity
45 to 60 pits/1hrs(Out Put)
Recommended
Usage
M/c can used to make pits 4", 6",8",10",12", 14" (Width) &
24"(Depth) Only in agriculture land with 30% to 40%
Moistures
Note
:
Specifications are subject to change without prior notice.
MAINTENANCE AND STORAGE
AUGER MAINTENANCE
1. The gear case has 4 oz. of grease installed at the factory. It is recommended that
once a year the gear case be split and the grease level checked. Add grease only
if level of grease is below top of the gears.
DO NOT OVERFILL.
2. Ensure all the screws, nuts, and bolts are tight.
3. During cold weather, store the unit in a cool environment. Transferring the unit
from a warm to a cold place can cause the buildup of harmful condensation.
4. If blade performance decreases, turn unit off and disconnect spark plug wire.
Carefully inspect cutting edge of blade for any signs of wear. If blades show any
of these signs, they need to be sharpened or replaced
.
